Create perfectly centered washers and ring blanks with this set of five nylon center positioning dies. Designed to fit the V-Line disk cutter (125.1734), these dies are also compatible with other round disk cutting sets that have similar hole sizes, including inch-sized disc cutter sets 125.1738, 125.1737, and 125.1790, matching holes from 1/2″ to 1″.
Each nylon centering die holds a pre-punched metal disk precisely in place beneath a larger punch, ensuring the inner hole is perfectly centered before the outer diameter is cut. The result is a clean, symmetrical washer every time — ideal for ring blanks, decorative washers, and layered metalwork.
How to Use
- Punch a hole in your metal using the punch size that matches your desired inner diameter.
- Remove the cut disk and position it beneath a larger punch hole sized to your desired outer diameter.
- Insert the matching centering die for that hole to center the disk precisely.
- Clamp the disk between the upper and lower halves of the disc cutter using a clamping device, such as the Pepetools clamping device.
- Remove the centering die and replace it with the correct cutting die for the hole you are using.
- Punch the outer diameter — your washer now has a perfectly centered hole.
Features
- Set of five nylon center positioning dies in graduated sizes
- Designed for use with V-Line disk cutter 125.1734
- Compatible with inch-sized disc cutter sets 125.1738, 125.1737, and 125.1790
- Enables perfectly centered holes for washers and ring blanks
- Nylon construction for precise, non-marring fit within cutter holes
- Covers a range from 1/2″ to 1″ in five incremental steps
Specifications
| Contents | Set of 5 nylon centering dies |
|---|---|
| Size Range | 1/2″ – 1″ (12.6 mm – 25.3 mm) |
| Material | Nylon |
| Origin | India |
What’s Included
- 1/2″ (12.6 mm) centering die
- 5/8″ (15.8 mm) centering die
- 3/4″ (18.9 mm) centering die
- 7/8″ (22.1 mm) centering die
- 1″ (25.3 mm) centering die
Compatibility
These centering dies are designed to fit the V-Line disk cutter 125.1734 and are also compatible with Otto Frei inch-sized disc cutter sets 125.1738, 125.1737, and 125.1790 for holes ranging from 1/2″ to 1″.






Rezensionen
Es gibt noch keine Rezensionen.